Wilson SignalBoost DT cellular/PCS repeater works with ALL cellphones and data cards, except for those on IDEN/Nextel systems. In addition to the attractive, low profile amplifier, the kit includes a small,5dB gain direction antenna and all the hardware necessary to mount it in three different ways: outdoor pole mount, outdoor wall mount andindoor window mount. Includes 50 feet of RG6 cable, an articulating rubber-duckie style coverage antenna. Receiver sensitivity -108dBm CDMA FER half percent, Attractive, low profile design, Covers up to 3000 square feet, Oscillation and overload protection.

The Wilson SignalBoost DT repeater kit comes with a directional 5dB external antenna. Directional antennas are designed to be pointed toward the signal source, and provide superior signal reception. The SignalBoost DT antenna is small and visually unobtrusive.

The interior antenna with the SignalBoost DT kit attaches directly to the amplifier unit. This omni directional device broadcasts signal equally in all directions

Features:

• Wireless - No hard connection to your phone
• Dual Band - Works with all cellular networks other than Nextel
• Improves data services e.g. HSDPA, EDGE, EVDO, UMTS etc
• Small and sleek design.
• No technical experience required for installation

Technical Specifications:

• Battery performance of up to 6 hours talk time or up to 6 days standby.
• Frequency:
  • US PCS 1900 MHz Band
  • Uplink: 1850 - 1910 MHz
  • Downlink: 1930 - 1990 MHz
  • US Cellular 800/850 MHz Band
  • Downlink: 869 - 894 MHz
  • Uplink: 824 - 849 MHz
• Gain: 55 dB @ 800 MHz / 55 dB @ 1900 MHz
• Cable length: 50ft RG6 (Standard cable TV coax - 75 Ohm)
• Linear Output power: +30dBm
• Max Output Power: +35dBm
• Flatness: ± 2 dB / ± 2dB
• Noise Figure: 3.5dB nominal
• Isolation: > 90dB
• Power Requirements: 110-240V AC, 50-60 Hz, 0.6 A Max
• Connectors: TNC Female / F-Female
• Dimensions: 6.2 * 4.2 * 1.5 (inch)
• Weight: 0.64 lbs (amplifier)